Redline Communications RDL-2000 Manual de Serviço descarregar pdf (Página 36)

RDL-2000 Installation Guidelines

Table 10: Outdoor Line Protection Wiring Diagram

Terminal Block (TB) Signal Color Code Wire Color

1 Rx + White / Orange

Rx -

Orange

Tx +

White / Green

4 Tx - Green

5 48 (+) Blue

6 48 (+) White/Blue

7 48 (-) White/Brown

48 (-)

Brown

Line Protector Mast Mounting Kit

This kit is used for mounting the lightning protector to a 76 - 127 mm (3-5 in) diameter pole.

Note: The Polyphaser IX-Pole-Kit kit is not available directly from Redline, and must be

ordered separately (if required) from a telecom equipment distributor.

1. Align box cover plate (1) mounting holes (Pemstuds facing out) with mounting holes on the

LP box.

2. Insert screws (2) through the LP box and cover (1), secure with #8 washer (5) and nut (4).

3. Attach bracket (3) onto Pemstuds of assembly cover (1) using #10 washer (7) and nut (6).

4. Slide hose clamp (8) through both slotted grooves of bracket (3), attach hose clamp to pole.

Figure 24: Lightning Protection - Mounting Kit

Table 11: Lightning Protection - Mounting Kit Parts List

Item Description Qty. Item Description Qty.

1 Assm Bracket 1 5 Washer #8 int. 2

2 Screw 8-32 x 0.5 2 6 Nut #10 2

3 Bracket Mnl Dbl Bend 1 7 Washer #10 2

4 Nut #8 2 8 Clamp Hose 3-5 in. 1

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 51 52

Sem comentários

Redline Communications RDL-2000 Manual de Serviço Página 36