Redline Communications RDL-2000 Manual do Utilizador descarregar pdf (Página 32)

RDL-2000 User Manual

UL Rate: (Master only) Select the UL modulation/coding for the wireless link. The RDL-

2000 will receive using only the selected modulation/coding. Identical settings must be

used on the Master and Slave. When Adaptive Modulation is enabled, this setting is

ignored.

Channel BW: Select the RF channel bandwidth. Settings include 5, 10, 20, and 40 MHz

(based on Regional setting). Identical settings must be used on the Master and Slave.

Enable MIMO: Check this box

to enable the MIMO feature (and the transceiver for

RF Port 2). This setting must be enabled for use of a 2 x 2 MIMO antenna system.

Identical settings must be used on the Master and Slave.

Current Rate

Displays the current DL and UL modulation/coding.

Get Parameters: Click this button to read the current settings from the RDL-2000.

Submit Parameters: Click this button to send the current parameter settings on this

screen to the RDL-2000. The RDL-2000 will save these settings in non volatile RAM. All

unsaved changes are discarded when the operator changes to another screen.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 50 51

Sem comentários

Redline Communications RDL-2000 Manual do Utilizador Página 32