Redline Communications RDL-2000 Manual do Utilizador descarregar pdf (Página 46)

RDL-2000 User Manual

maximum of 16 bytes, and include only alphanumeric characters (a-z, 0-

9). This field is used only when AES is enabled. Identical encryption

settings must be used on the Master and Slave.

Example: Use the following command to enable AES on the Master.

[192.168.25.2] >>:aes on SharedKey123

aes on SharedKey123

Important: The Master and Slave RDL-2000 units must

have identical encryption

settings or the system will not establish a wireless link

atpc <off> <on> <power>

View or change the automatic transmit power control (ATPC) mode settings.

[blank] - Display current mode/setting.

Master: Display current ATPC RSSI level.

Slave: Display current Tx power level.

off - Disable ATPC.

on - Enable ATPC.

power - Enter the target Rx power threshold (dBm).

Example: Use the following command to enable ATPC on the Master and set the

RSSI threshold of the link to -60 dBm.

[192.168.25.2] >>:atpc on -60

autorate <off> <on>

View or change the adaptive modulation settings. When adaptive modulation is

disabled, the RDL-2000 will transmit using only using the selected

modulation/coding (see rate command). When adaptive modulation is enabled,

the modulation/coding is adjusted automatically based on current link conditions.

[blank] - Display current mode/setting.

off - Disable adaptive modulation.

on - Enable adaptive modulation.

Example: Enable adaptive modulation on the master:

[192.168.25.2] >>:autorate on

MU autorate

autorate on

extsync

This function not supported in this release.

firmware <[blank] | file.brn>

View the firmware versions or upload a new binary file. The RDL-2000 contains

non-volatile storage for two versions of the software. The upload function

overwrites the non-operational version.

[blank] - Display current software versions. The text 'FFFF FFFF' indicates that

no software is loaded in the alternate bank.

binary - Full name of binary file (including.bin extension). A TFTP server must be

installed and running on the computer running the Telnet session.

To upgrade the firmware, the computer hosting the Telnet session must

also have a TFTP server. The firmware file must be located in the TFTP

servers default directory (can not specify a path). When the transfer has

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

1 2 ... 41 42 43 44 45 46 47 48 49 50 51

Comentários a estes Manuais

Sem comentários

Redline Communications RDL-2000 Manual do Utilizador Página 46

Comentários a estes Manuais